How to Fix A Door With A Hole In It

Learning how to fix a door with a hole in it is part of the necessary education for anyone who wants to consider himself a competent do it yourselfer when it comes to home repairs. Fixing a hole in a door is usually a much simpler and less expensive procedure than learning how to fix a window with a hole in it. Just because a door has a hole in it doesn't mean that you have to go to the expense of purchasing a whole new door. You can save yourself some time and money by learning how to patch a door with a hole in it so that it looks almost as good as new.

How to fix a door with a hole in it often depends upon the size of the hole that needs repair. Most doors used in homes today are hollow-core in construction rather than being solid doors to make the doors more affordable. The only problem with this is that if something sharp or heavy bangs up against the door, a hole can easily be created. But when a homeowner knows the tricks for how to fix a door with a Wyoming in it, referring to a large square hole that looks like the U.S. state of the same name, it is an easy job to getting the door repaired and eliminating the damage.

A homeowner always has the option of leaving the hole in the door. But when you know how to clean a door with a hole in it, the door will look clean except for the dark spot created by the gaping hole you didn't bother to fix. Going to your local hardware store and investing in a can of spray foam insulation is one of the easiest ways how to change door with a hole in it to a door that looks like you just installed it. All you need to do is aim the nozzle at the hole and begin filling it with the aerosol foam. Allow the foam to peak out on top of the hole and dry overnight. Then you can shave away the excess dried foam the next day using a sharp knife or razor blade, and then apply a compound known as spackling over the area where the hole previously existed. After this has dried, you can sand the area to be sure it is level, then add the finishing touch to your door repair project by giving the door a new coat of paint.

The procedure is pretty much the same for how to fix a door with a crack in it or how to fix a door with a dent in it. Sometimes the hole created isn't square or round or very deep, but just enough of a depression to make the door look unattractive. You may have to forego spraying the insulation if there is more of a depression in the door than an actual hole exposing the interior of the door and simply sand down the area first. Then use your putty knife to apply spackling to the area to even out the surface and let it dry completely prior to sanding the spackled area smooth, then giving the area a primer coat of paint, followed by an exterior coat of paint.

Keep that can of foam insulation handy among your do it yourselfer tools because you can use it again when you need to know how to fix a cabinet with a hole in it or how to fix a wall with a hole in it because the same repair steps apply. There is no need to spend money on a handyman when you know how to fix a door with a hole in it to make it look as good as new in a short amount of time.